Like any other home appliance, the better you take care of it, the more efficiently your water heater will perform. Routine maintenance is a start!
Read today's post for 6 tips for tankless water heater cleaning and other vital maintenance tasks. Caring for your water heater on both the inside and the outside helps ensure optimal operating efficiency. You may even extend its useful life!
1. How Often Should You Clean a Water Heater?
Whether you're a recent convert, or you've owned your tankless water heater for several years, you likely have questions about how often you should clean the unit.
Most manufacturers recommend an annual flushing of your water heater. That said, the region where you live and your water quality may change the frequency.
If you live in an area with hard water, you may need to flush your water heater more often. If you're uncertain about water quality in your area, you can check with your city government. All cities provide residents with monthly or quarterly reports on the condition of municipal water.
Your trusted plumbing professional can also help you decide how often you flush out your water heater. As far as cleaning the outside of the unit, we'll talk about that next.
2. Taking Care of Exterior Maintenance
Most homeowners enjoy at least a few DIY home maintenance projects. If you’re new to the game, taking care of the outside of your water heater is one way you can ease into water heater care.
Exterior maintenance doesn't require an extraordinary amount of time or supplies.
Start by wiping down the cover. Using a non-abrasive cleaner and a soft cloth keeps the unit free of dust and helps prevent rust development.
Next, inspect the pipes. For our northern neighbors, checking pipes during cold weather avoids frozen pipes. While Austin, TX enjoys mild winters, it’s still a good idea to watch out for cracks or splits in the pipe insulation.
Finally, if your tankless water heater has a pressure relief valve, you should test it. Not all units have this feature. If you’re not sure about your water heater, ask your plumber for help.
Exterior maintenance typically takes about 20 minutes. Flushing the water heater will take a little longer.
3. Why You Should Flush
Over time, limescale deposits build up in all water heaters. In standard tank models, failing to descale can pose a risk of explosion. Tankless water heaters won’t explode, but if you don’t flush out the sediment, you may force the unit’s heat exchanger to work harder than necessary.
Keeping sediment flushed out not only helps the water heater work more efficiently, but it can also prevent other problems.
Before we dive further into descaling, we need to talk about isolation valves. Think of an isolation valve like the shut-off valve on a standard tank water heater. It allows you to turn off the water or gas supply to the unit.
Your water heater may or may not have an isolation valve. If it doesn’t, consider asking your plumber to install one. Lack of an isolation valve can create a safety hazard when you perform maintenance.
4. What Supplies Do You Need to Clean the Water Heater?
We’ve addressed safety—now we can talk about what you need to flush the unit. Here’s a list of the supplies:
- Five Gallon Bucket
- Submersible Pump
While you can buy each item separately, you can also get everything together in a flush kit. Flush kits include a descaling solution, or you can use 4 gallons of undiluted white vinegar.
5. How to Descale a Tankless Water Heater
Since descaling a water heater is one of the maintenance tasks many homeowners can tackle with minimal assistance, we’re sharing the basic steps.
First, disconnect the electricity going to your water heater. Locate the gas isolation valve and close it. Close the hot and cold water shut-off valves to prevent water from getting into the unit while you’re working on it.
If your unit features a pressure relief valve, open it and carefully release any pressure.
Next, connect the hoses in your flush kit to both the cold and hot water service ports. Then, place the submersible pump in your bucket. Connect the cold water hose to the pump and put one end of the hot water hose in the bucket.
Now, you can either pour four gallons of vinegar or the descaler included with the flush kit into the bucket.
To flush the water heater, open the cold and hot service ports, then turn on the submersible pump. Let your chosen descaling solution circulate through the water heater for at least an hour. Anything less than an hour won’t do a sufficient job of breaking down the scale buildup.
After you finish descaling, turn off the pump. Then, dump the vinegar.
6. Final Steps for Tankless Water Heater Cleaning
Your next steps include closing the cold water service port and opening the cold water shut-off valve. This step flushes out any lingering vinegar. Afterward, you’ll close the valve and let the water finish draining.
You should now close the hot water port. Finally, if there’s a cold water inlet filter, remove it and the hot water in-line filter. Flush both in the sink so that you can remove any leftover sediment.
Now, you know how to clean a tankless water heater! Keep in mind that although it can be a great DIY project, you may feel more comfortable calling your plumber to do the job.
Need to Schedule Tankless Water Heater Maintenance?
Keeping up with maintenance, including tankless water heater cleaning, should take place at least once a year. You may need to take care of other tasks, such as wiping down the exterior of the unit, more often, especially if the area where you install the water heater receives a lot of dust.
While you can take care of basic maintenance on your own, why not let our team help? We’re always happy to schedule routine descaling and annual service for both tankless and standard tank water heaters. Contact us today for an estimate.