What is hydro jetting?

It's drain cleaning done with pressurized water instead of a cable. A jetting hose feeds into the line and blasts water at up to 4,000 PSI, scouring grease, scale, and root fragments off the entire interior wall of the pipe. Snaking cuts a path through a clog. Jetting removes it.

How is hydro jetting different from snaking a drain?

Snaking is faster and cheaper for a simple, isolated clog, like a single backed-up toilet. Hydro jetting costs more upfront but clears the entire pipe diameter, not just a channel through the middle. For recurring clogs, grease-lined kitchen lines, or root intrusion, jetting tends to be the more cost-effective solution over time because the problem doesn't come right back in three weeks.

Can hydro jetting damage older pipes or cast iron lines?

Used correctly, no. We first run a camera inspection on any line we're not already familiar with. If the pipe condition shows heavy corrosion, cracks, or a cast-iron section that's thinned out, we'll flag it before jetting and discuss pipe lining or trenchless pipe repair instead. Jetting a compromised line without checking first is how damage happens, and that's exactly what the camera pass is meant to catch.

What are the signs I need hydro jetting instead of a basic drain cleaning?

A clog that clears for a week or two and comes right back is the biggest one. Gurgling sounds from a drain when another fixture runs, slow drainage across multiple fixtures at once, and foul odors rising through a floor drain all point to buildup or root intrusion farther down the main line rather than a simple local clog.

Do you pair hydro jetting with a sewer camera inspection?

On most jobs, yes. A sewer camera inspection shows us exactly what's causing the clog and where, whether that's grease, tree root intrusion, or a bellied section of pipe. It also lets the homeowner see the actual footage rather than just hear a description of the plumbing system underground.

How often does a home's main sewer line need hydro jetting?

Depends heavily on the trees near the line and the pipe's age. A newer home with PVC and no mature trees nearby might go years without needing it. A home with cast-iron pipe and a large tree root system nearby might need it every 12 to 18 months as part of a regular maintenance schedule. We'll give you a realistic timeline based on what the camera shows, not a generic number.

What areas around Washington do you service for hydro jetting and drain cleaning?

We provide plumbing services in Washington, Union, Saint Clair, Sullivan, Pacific, and Villa Ridge. That's home turf for us. If your address falls outside that range, call anyway. We'd rather tell you upfront if it's not a good fit than have you wait around for a truck that isn't coming.

How do I book hydro jetting service for my home in Washington, MO?

Call our office and describe what's going on, whether that's a recurring clog, slow drains across the house, or a sewer smell that won't quit. We'll get a same-day or next-day visit scheduled, run a camera inspection if the line hasn't been checked recently, and give you a flat-rate price before anything gets jetted or any other plumbing repairs are done. We don't run overnight or Sunday appointments, but weekday and Saturday slots fill fast during spring, so it's worth calling as soon as the problem shows up rather than waiting it out. Whether you need a drain cleaning , sump pump service , toilet repair , or any other service, we are here for you.

Hydro Jetting in Washington, MO

Serving Franklin County Homes Since 2001

Tree roots and grease buildup don't care how old your pipes are. When drains repeatedly back up in your Washington-area home, hydro jetting clears the entire line rather than just poking a hole in the clog. We've handled slow drains and root intrusions across Franklin County since 2001, and our plumbing crew averages 10 years in the trade. Call a Washington plumber for a straightforward, flat-rate quote before any work starts.

Serving Franklin County Homes Since 2001

Residential
Commercial

Let Us Call You

First Name*

Last Name*

Email*

Phone Number*

Street Address*

ZIP Code*

Yes! You can text me service reminders and other messages.

By checking this box, I agree to opt in to receive automated SMS and/or MMS messages from Mr. Rooter Plumbing, a Neighborly company, and its franchisees to the provided mobile number(s). Message & data rates may apply. Message frequency varies. View Terms and Privacy Policy. Reply STOP to opt out of future messages. Reply HELP for help.

By entering your email address, you agree to receive emails about services, updates or promotions, and you agree to the Terms and Privacy Policy. You may unsubscribe at any time.

Residential & Commercial Services

Mr. Rooter Plumbing: How Hydro Jetting Works

A cable snake punches a hole through a clog and calls it done. Hydro jetting does something different. It runs water at up to 4,000 PSI through the pipe wall to wall, stripping out grease, sludge, and root hair the snake left behind. The line comes out clean, not just open.

A St. Clair plumber will start almost every job with a video camera inspection, not a jetting hose. Running high-pressure water through a line blind is how people end up jetting a pipe that's already cracked, which makes things worse. A quick sewer line camera pass tells us whether we're looking at grease buildup that'll clear easily, root intrusion that needs cutting first, or a cast iron section that's too far gone for jetting and needs pipe lining or a trenchless repair instead. Homeowners get to see the footage too, not just take our word for it.

Once we know what's actually in the line, the jetting hose feeds in and scours the pipe's full diameter. Grease lining a kitchen line, root hair from a nearby oak or silver maple, scale buildup in an old cast iron section, all of it gets stripped off the pipe wall instead of just pushed further down. That's the part a snake can't do.

Some signs that the main line is the problem and it's not just one fixture include issues like foul odors, gurgling drains, and water backing up into a tub when the washer runs. Catching that early is the difference between a same-day drain cleaning and a weekend of water damage in the basement.

Why Washington Homeowners Call Us First

Washington has a lot of older housing stock, and older housing stock means older pipes. Homes built before the 1980s around town, and plenty of the farmhouses out toward Union and Saint Clair, still run on cast iron or clay tile. Those materials corrode from the inside and give tree roots a seam to grow into. We see the same pattern on almost every root intrusion call: a mature tree near the line, and a drain that clears for two weeks, then slows down again.

That's the tell that separates a one-time clog from a structural problem, and it's the kind of thing you learn from doing this work for a while, not from a manual. Our plumbing crew averages 10 years in the trade, and we've been working Franklin County drains since 2001.

We work in Washington, Union, Saint Clair, Sullivan, Pacific, and Villa Ridge. If you're out past that range, give us a call anyway, and we'll tell you straight whether it makes sense for us to come out.

Pricing is flat-rate and quoted before anything gets jetted. No hourly surprises, no guessing what the final bill looks like once the truck is already in the driveway.

Mr. Rooter Plumbing of Franklin County

Areas We Serve

Services We Provide

Residential
Commercial

Frequently Asked Questions About Hydro Jetting in Washington, MO

It's drain cleaning done with pressurized water instead of a cable. A jetting hose feeds into the line and blasts water at up to 4,000 PSI, scouring grease, scale, and root fragments off the entire interior wall of the pipe. Snaking cuts a path through a clog. Jetting removes it.
Snaking is faster and cheaper for a simple, isolated clog, like a single backed-up toilet. Hydro jetting costs more upfront but clears the entire pipe diameter, not just a channel through the middle. For recurring clogs, grease-lined kitchen lines, or root intrusion, jetting tends to be the more cost-effective solution over time because the problem doesn't come right back in three weeks.
Used correctly, no. We first run a camera inspection on any line we're not already familiar with. If the pipe condition shows heavy corrosion, cracks, or a cast-iron section that's thinned out, we'll flag it before jetting and discuss pipe lining or trenchless pipe repair instead. Jetting a compromised line without checking first is how damage happens, and that's exactly what the camera pass is meant to catch.
A clog that clears for a week or two and comes right back is the biggest one. Gurgling sounds from a drain when another fixture runs, slow drainage across multiple fixtures at once, and foul odors rising through a floor drain all point to buildup or root intrusion farther down the main line rather than a simple local clog.
On most jobs, yes. A sewer camera inspection shows us exactly what's causing the clog and where, whether that's grease, tree root intrusion, or a bellied section of pipe. It also lets the homeowner see the actual footage rather than just hear a description of the plumbing system underground.
Depends heavily on the trees near the line and the pipe's age. A newer home with PVC and no mature trees nearby might go years without needing it. A home with cast-iron pipe and a large tree root system nearby might need it every 12 to 18 months as part of a regular maintenance schedule. We'll give you a realistic timeline based on what the camera shows, not a generic number.
We provide plumbing services in Washington, Union, Saint Clair, Sullivan, Pacific, and Villa Ridge. That's home turf for us. If your address falls outside that range, call anyway. We'd rather tell you upfront if it's not a good fit than have you wait around for a truck that isn't coming.
Call our office and describe what's going on, whether that's a recurring clog, slow drains across the house, or a sewer smell that won't quit. We'll get a same-day or next-day visit scheduled, run a camera inspection if the line hasn't been checked recently, and give you a flat-rate price before anything gets jetted or any other plumbing repairs are done. We don't run overnight or Sunday appointments, but weekday and Saturday slots fill fast during spring, so it's worth calling as soon as the problem shows up rather than waiting it out. Whether you need a drain cleaning, sump pump service, toilet repair, or any other service, we are here for you.

See All FAQs

Residential
Commercial