Residential Hydro Jetting Services in Manchester, NH

Hydro jetting is generally a safe and effective method for cleaning your pipes, but there is a small risk of damage if your pipes are already old, weakened, or compromised. The high-pressure water used in hydro jetting can potentially worsen existing cracks or holes in pipes if they aren’t in good condition.

To avoid this, it’s essential to have a professional, like a hydro jetting specialist from Mr. Rooter Plumbing of Greater New Hampshire, inspect your pipes before performing the service. If any pipes are found to be in poor condition, alternative methods may be recommended to prevent further damage.

Hydro jetting is often considered a more effective method than snaking for several reasons, including the following:

Thorough Cleaning

Hydro jetting uses high-pressure water to clean the entire inner surface of the pipes, removing grease, scale, tree roots, and debris. Snaking, on the other hand, is more of a mechanical process that breaks through clogs but doesn’t provide a deep clean.

Longer-Lasting Results

Hydro jetting can prevent future clogs by keeping your pipes clear, while snaking is often a temporary fix that might need to be repeated more frequently.

Non-Invasive

Hydro jetting is less damaging to pipes compared to snaking, which involves pushing a metal cable through the pipes, potentially causing damage.

The results of a hydro jetting session can last anywhere from 1 to 3 years, depending on the condition of your pipes, the amount of buildup, and the frequency of use. If your plumbing system is regularly maintained, hydro jetting can keep your drains clear for a longer period.

To maximize the effects of hydro jetting, it’s recommended to have your pipes inspected regularly and schedule preventive maintenance services. This helps ensure that your plumbing system stays in optimal condition and that hydro jetting remains an effective solution.

Although both a sewer jetter and a pressure washer use water to clean, they are designed for different purposes and operate in different ways:

Sewer Jetter

A sewer jetter is specifically designed for cleaning pipes and sewer lines. It uses high-pressure water to clear blockages and debris from inside pipes, removing grease, scale, and tree roots. The water pressure in a sewer jetter is much higher than that of a pressure washer, typically ranging from 3,000 to 4,000 PSI.

Pressure Washer

A pressure washer is generally used for cleaning surfaces like driveways, decks, or buildings. It uses lower water pressure (usually between 1,500 and 3,000 PSI) and is not designed to reach the depths of pipes. While a pressure washer may be effective for certain surface-level cleanings, it is not suitable for drain cleaning or clearing blockages inside pipes. A hydro jet drain cleaner is essentially a sewer jetter adapted for clearing out debris from inside pipes and sewer lines, offering a more targeted and powerful solution for drain cleaning.