Pinhole leaks, rusty water, and low pressure at more than one tap are all signs of the same thing, really, namely that the pipes inside the walls are wearing out. As the Moncks Corner plumber homeowners have called since 2002, Mr. Rooter Plumbing of Greater Charleston replaces aging supply lines with new PEX or copper. We map every run, keep wall openings small, and patch them when we’re done.
Residential & Commercial Services
About Our Repiping Service in Moncks Corner, SC
Every Charleston plumber will tell you the two pipe materials that fail most in the average local house are grey polybutylene (installed from the late 70s through to the mid-90s) and galvanized steel in the older properties. Polybutylene fails through the action of the chlorine in the treated water and will simply split at the joints with no warning at all. Galvanized steel fails through internal rusting; the pipe gets progressively narrower, and your shower will eventually just barely run. Fixing one leak at a time is rarely going to be the answer, as the rest of the system is the same age.
How We Plan a Repipe
Repiping in Moncks Corner, SC begins with a walk-through of the house. We trace each supply line from the main shutoff to each fixture, check water pressure with a gauge, and note exactly where the pipes run through the crawl space, the attic, and the slab. You then get a written plan with material options and line-item pricing. If you're in a house that has a crawl space, most of the runs are accessible from below, which keeps the drywall cuts to a minimum.
Choosing Your Pipe Material
- PEX-A: Flexible cross-linked polyethylene that bends around corners with fewer fittings. It's better at coping with freeze expansion than rigid pipe and won't scale up inside.
- Type L copper: Thicker walls than Type M copper and a track record that goes back decades. It’s a strong pick for exposed runs and homeowners who want metal pipe.
What Happens on Install Day
Our crew turns off the water, runs new trunk lines or a PEX manifold, and then connects each fixture with fresh stub-outs and shutoff valves. The walls don't get closed until the full system has been pressure tested. We build to the IPC in South Carolina, so we'll pull the local permit and arrange the inspection for you. Most whole-house jobs take 2-4 days. In most cases, we'll restore the water each evening, so you're not without a shower that night.
Why Choose Mr. Rooter Plumbing of Greater Charleston for Your Repiping Project?
Mr. Rooter Plumbing of Greater Charleston has been doing repipe work on homes from Goose Creek to Mount Pleasant since 2002. That history is important when it comes to a repipe. We've seen how the builders plumbed the various areas in different decades, so we often know what's behind the walls before we even open them. We do repiping in Lowcountry homes from the 1960s ranches right through to the newer builds with the failing brass PEX fittings. Every job comes with the Neighborly Done Right Promise®, and you approve the price, and that's the price you pay. If the walkthrough reveals a dying water heater or a slow sewer line, we'll let you know. The same team does the water heater installations and drain cleaning.
Mr. Rooter Plumbing of Greater Charleston
- Adams Run
- Awendaw
- Charleston
- Charleston Afb
- Daniel Island
- Edisto Island
- Folly Beach
- Goose Creek
- Hanahan
- Hollywood
- Isle of Palms
- James Island
- Johns Island
- Kiawah Island
- Ladson
- Mc Clellanville
- Moncks Corner
- Mount Pleasant
- Nexton
- North Charleston
- Ravenel
- Sullivans Island
- Summerville
- Wadmalaw Island
- West Ashley