DIY How to Plug a Bath Drain
Is your bathtub drain plug lost or missing? We understand how frustrating that experience can be. After all, you need this piece to hold water for a bath and control drainage afterward. Luckily, a missing drain doesn't render your bathtub unusable. Why?
Lost Your Bathtub Drain Plug? Try These Alternatives
If you've misplaced your bathtub drain plug, the following solutions can help you out:
Plumber's Putty Fix
One method to plug your bath drains starts with a putty fix, the plumber's cement.
Did you know you can use a plumber's putty to seal your bath drain when the stopper doesn't work? And the process is relatively easy. Just roll a piece of this clay-like compound in your hands and use it to encircle the drain.
Note that the plumber's putty fix is a one-time solution, so you'll need to get rid of it when it is time to drain the tub.
Washcloth in a Bag
How can you plug a bathtub drain when a plumber's putty or any other solution is out of the question? Simple. Use a washcloth in a storage bag! Washcloths and plastic bags are standard items in most homes. This solution is a plausible alternative to plugging your bath drain.
If you have a storage or plastic bag, which you likely do, insert a washcloth and suck or squeeze out the air inside. Then seal the bag and stick the washcloth-in-a-bag across the tub's drain hole. You can use this simple yet effective hack to block or mitigate your bathtub's drain rate.
Single-Serve Coffee Pods
According to statistics, the US has around 150 million coffee enthusiasts. If you belong in this category and use coffee pods to brew, don't discard the empties, especially if you have tub drain issues.
An empty coffee pod can be handy when you don't have a functional bathtub drain. Measure the pod to ensure it fits properly; if it is a good fit and easy to remove, place the item in the drain to test its ability to hold water by filling the tub.
If it leaks a bit, don't fret. Most empty coffee pods allow water to pass through but will last long enough for you to enjoy a good soak.
Everyday Toilet Plunger
You likely know that a plunger can unplug your bathtub drain. But you may not consider that the device can help you do the opposite: plug the drain.
If you need to plug your bath drain with a plunger, first thoroughly clean and disinfect the plunger's rubber end. Once your plunger is sanitized, set the rubber end over the drain hole.
Additionally, if the rubber part is completely sealed, you can remove the wooden or plastic handle while you bathe for optimum results and comfort.
Homeowners always have a few tricks up their sleeves. But most don't know that jar lids are the most straightforward answer for how to plug bath drains. Thankfully, you can replace a missing bath drain with a jar lid, provided it is big enough to cover the drain hole.
Plastic Bag Filled with Water
Quick drain plugs are lifesavers when you don't have time to find a spare or an alternative. With that in mind, one of the fastest ways to plug a bathtub involves using a plastic bag filled with water.
Simply fill a plastic bag with water, seal the open ends, and place it over the drain. Once you're done, fill the tub and enjoy a good soak. You can lift the device anytime you want to drain the tub.
Bathroom Plumbing Maintenance and Repair in Phoenix
Admittedly, there are many alternatives and answers for how to plug bath drains. But none can compare to having a new drain stopper installed, and Mr. Rooter Plumbing of Phoenix is ready to take on this task! Additionally, if you have a blocked, dirty, or smelly bath drain, Mr. Rooter Plumbing of Phoenix should be your go-to.
We have skilled experts, exceptional services, and an excellent track record that stretches back almost 50 years! Let us help you fix your bath drain and ensure everything runs seamlessly again, without blockages, foul odors, or other pertinent issues.
Contact us today for more information.